How To Pair Vtech Baby Monitor
User'south transmission
DM111/DM111-two
Prophylactic & Sound
TM
audio monitor
Congratulations
on purchasing your new VTech product. Earlier
using this product, please read Important
safety instructions in this manual.
For support, shopping, and everything new
at VTech, visit our website at
www.vtechphones.com. In Canada, please
visit world wide web.vtechcanada.com.
Register online to get an additional
three-calendar month warranty!
Visit world wide web.vtechphones.com.
Registration
Register your product online for
enhanced warranty back up.
Product news
Learn about the latest VTech
products.
Positioning the baby monitor
Place the parent unit within the operating range
of the infant unit of measurement. We recommend the parent
unit is at least i meter (three feet) away from the
baby unit to avoid sound feedback. If y'all however
experience audio feedback, move the parent
unit and the baby unit further apart.
Operating range
The operating range of the babe monitor is
upwardly to 300 meters (thousand feet) outdoors or
50 meters (160 feet) indoors. The actual
operating range may vary depending on
the environmental conditions, and other
interferences such every bit walls, doors, and other
obstructions.
Baby unit overview
Parent unit of measurement overview
Connect
Connect the parent unit of measurement
Before apply
You lot may exam the baby monitor before initial
utilise, and at regular times thereafter.
To test your baby monitor:
Identify the parent unit and the babe unit in the
same room to exam the product.
Press and agree on the baby unit of measurement until the
Power light turns off.
Press and hold on the baby unit again
until the Ability light turns on.
Press and hold on the parent unit of measurement the
Ability/LINK light turns off.
Press and agree on the parent unit again
until the Power/LINK calorie-free turns on.
ane.
2.
3.
four.
five.
If the parent unit is not linked to the baby unit,
the POWER/LINK light on the parent unit of measurement will
flash. Move the parent unit closer to the baby
unit (merely not less than 1 meter / 3 anxiety).
•
i
–
Power light
2
–
(On/off)
Printing and hold to turn on or off the
infant unit.
3
–
Microphone
four
–
Power jack
Overview
Power / LINK
POWER/LINK light
Lights off when the parent unit
is off.
Lights on in greenish when the
parent unit is on and linked to
the infant unit.
Flashes in green when in that location is
no link between the baby unit of measurement
and parent unit, or when the
parent unit of measurement is out of range from
the infant unit.
•
•
•
Visual sound indicator
The visual sound indicator shows
the sound level detected from
the baby unit. Information technology also shows the
volume level during speaker
book setting.
Sound level detected from the
infant unit is indepedent from the
volume level set at the parent unit.
Green lights indicate a
moderate sound level detected
from the baby unit; or
Level 1 to Level 3 of the
speaker volume setting.
Red lights indicate a higher
sound level detected from the
baby unit; or
Level 4 to Level 5 of the
speaker volume setting.
•
•
•
•
Low Battery
LOW Battery calorie-free
Flashes in carmine when the
battery is low.
•
Power
Power calorie-free
Lights off when the baby unit
is off.
Lights on in dark-green when the
baby unit is on.
•
•
1
–
Visual sound indicator
2
–
POWER/LINK light
iii
–
LOW BATTERY lite
4
–
(Volume down)
Press to decrease
the speaker volume.
5
–
(On/off)
Press and concord to turn on or off the
parent unit.
6
–
Speaker
Listen to sounds transmitted from the
baby unit of measurement.
vii
–
(Volume upwardly)
Press to increase
the speaker volume.
8
–
Belt clip
9
–
Bombardment compartment cover
x
–
Power jack
Baby unit light
Parent unit calorie-free
Using your baby monitor
Power on or off the baby unit
To plow on the baby unit:
Press and agree until the Power light
turns on.
To turn off the baby unit:
Printing and hold until the Ability light
turns off.
Power on or off the parent unit
To plow on the parent unit:
Press and concur until the Ability/LINK
light turns on.
To plow off the parent unit:
Press and concur unit the POWER/LINK
light turns off.
•
•
•
•
1
2
three
Connect the infant unit
Use just the parent unit power adapter
and the baby unit power adapter supplied
with this production.
The parent unit power adapter and baby
unit power adapter are intended for a
vertical or floor mount position. The prongs
are non designed to hold the plug in place
if it is plugged into a ceiling,
nether-the-table, or cabinet outlet.
Brand sure the parent unit, the baby unit
and the power adapter cord are out of
reach of children
Both the baby unit of measurement and the parent unit of measurement are
on once connected to the ability supply.
•
•
•
•
infant
's
sa
fe
ty
wo
rld
Pa
rent Unit
Power outlet not
controlled by a
wall switch
Power adapter
At least 1 meter (three feet)
Parts checklist
Babe unit (DM111 BU/DM111-2 BU)
Parent unit (DM111 PU/DM111-2 PU)
(1 for DM111 and 2 for DM111-two)
Power adapter for baby unit
Ability adapter for parent unit of measurement
(1 for DM111 and 2 for DM111-ii)
User'southward manual
•
•
•
•
•
4
1
two
iii
4
five
6
7
eight
9
baby
'due south sa
fe
ty
wo
rl
d
Pa
rent Unit of measurement
10
Power outlet non
controlled past a
wall switch
Power adapter
Below are the questions near frequently asked near
Below are the questions most frequently asked about
the babe monitor. If you cannot find the reply to
your question, contact customer service past visiting our
website at world wide web.vtechphones.com or
calling 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or telephone call one (800) 267-7377.
Why does the infant
monitor non respond
usually?
Try the following (in the gild
listed) for common cure:
ane. Disconnect the power
from the baby unit and
the parent unit.
2. Remove the batteries
from the parent unit.
3. Connect the baby unit of measurement to
the power supply once again.
The baby unit turns on.
four. Connect the parent unit
to the power supply
again; or insert ii new
AAA alkaline batteries.
The parent unit turns on.
5. Expect for the parent unit
to synchronize with the
baby units. Allow up to
one minute for this to
take identify.
Why doesn't the
Ability light on the
baby unit turn on
when I switch on the
units?
Perhaps the baby unit is not
connected to the power
supply.
Connect the baby unit of measurement to
power supply. The baby unit
turns on.
Why doesn't the
POWER/LINK
light on the parent
unit plough on when I
switch on the units?
Perhaps the battery of the
parent unit is empty and the
parent unit of measurement is not connected
to power supply.
Connect the parent unit of measurement to
power supply; or insert two
new AAA alkaline batteries
into the parent unit of measurement. The
parent unit turns on and
establishes connectedness with
the infant unit of measurement.
Why does the baby
monitor produce a
high-pitched noise?
The units may be also close
to each other. Make certain
the parent unit and the babe
unit at least 1 meter (3 anxiety)
away from each other.
Why does the
parent unit react
besides quickly to other
sounds?
The baby unit also picks up
other sounds than those
of your infant. Adjust the
speaker volume on the
parent unit.
Why don't I hear a
sound/Why tin't I
hear my babe cry?
You may have muted the
volume or set up information technology to a lower
level. You may need to
accommodate the volume to a
higher level.
Why does the
parent unit of measurement beep?
The infant units may exist out
of range. Move the parent
unit closer to the babe units
(only not less than 1 meter /
3 feet).
Why does the
parent unit LOW
BATTERY light
flash?
When the parent unit of measurement is
powered by batteries, there
is not sufficient power for
the parent unit to perform
normally. Supercede with two
new AAA alkaline batteries.
Why tin't I constitute
a connection? Why
is the connection
lost every now and
then? Why are at that place
sound interruptions?
The baby units may exist out
of range. Motion the parent
unit closer to the baby units
(merely non less than i meter /
3 anxiety).
Other electronic products
may cause interference with
your baby monitor. Try
installing your infant monitor
as far away from these
electronic devices as
possible.
Oft asked questions
Speaker volume of the parent unit
The speaker volume is preset to Level 3 on the
parent unit. You tin can suit to your preferred
sound level.
To adjust the speaker volume:
Press to decrease the volume, and to
increase the book.
•
If yous continue to press or even the
volume reaches the minimum or maximum
setting, the parent unit will sound once.
When the parent unit of measurement is in mute, the visual
sound indicator will still betoken the sound
detected from the infant unit.
•
•
Portable employ of the
parent unit (optional)
Use simply AAA alkaline batteries (not
included).
Do non mix erstwhile and new batteries. Do not
mix alkaline, standard (carbon-zinc) or
rechargeable (ni-cad, ni-mh, etc) batteries.
When the batteries are installed, the
parent unit turns on.
The parent unit does not support
recharging.
•
•
•
•
Install the batteries on the parent unit
Slide open the battery compartment cover.1.
two. Flip the ribbon beyond the battery
compartment.
Standby mode
The parent unit is on standby mode when:
information technology is not continued to the Ac ability supply; and
there is no sound detected from the baby unit.
The standby time varies depending on usage and
the battery life. Full batteries can last upwardly to viii days.
Replace the batteries when:
LOW BATTERY light flashes on the parent unit.
The parent unit beeps twice every 30 seconds.
The batteries are properly installed into the
parent unit, but the Power/LINK light on
the parent unit is off.
To clean and maintain this production:
Avoid putting it almost heating appliances and devices
that generate electric noise (for example, motors or
fluorescent lamps).
DO Not expose information technology to direct sunlight or moisture.
Avert dropping the product or treating information technology roughly.
Clean with a soft fabric.
Practise Not immerse the parent unit and the baby unit
in h2o and do not make clean them under the tap.
Exercise NOT utilise cleaning spray or liquid cleaners.
Brand sure the baby unit of measurement and parent unit are dry
before you lot connect them to the power supply.
This product operates with the maximum power
immune by the Federal Communications Commission
(FCC). Fifty-fifty so, the infant unit and the parent unit of measurement can
communicate over just a certain distance - which can
vary with the locations of the baby unit, the parent
unit, the weather condition, and the layout of your home.
When the parent unit is out of range, information technology volition beep three
times every x seconds and enter searching manner.
To meliorate reception, move closer to the baby unit
(but not less than 1 meter / 3 feet).
•
•
•
•
•
•
•
•
•
•
•
•
Full general product care
Operating range
three. Insert two AAA element of group i batteries into the
bombardment compartment on top of the ribbon.
4. Slide the battery compartment comprehend until information technology
clicks into identify.
Storage
When you lot are not going to use the baby monitor for
some time, remove the batteries from the parent unit.
Store the parent unit, the baby unit and the adapters
in a absurd and dry place.
babe
's sa
fe
ty
wo
rl
d
Pa
hire Unit
Source: http://babycare.manualsonline.com/manuals/mfg/vtech_communications/dm111.html
0 Response to "How To Pair Vtech Baby Monitor"
Post a Comment